Categories

System glitches and false alarms can be exasperating, and even more concerning, could prevent your home’s security from doing its job effectively. Thankfully, most troubles, from false alarms to dead batteries, are simple to remedy. Explore our suggestions for troubleshooting your home alarm system in Abilene. We’ll help you keep your family members protected and your system operating the way it should.

Test Your Home Security System In Abilene

One great way to troubleshoot your property’s security is to test it! The latest systems allow you to place them in test mode to avoid triggering an emergency call. Once you’re in test mode, take these steps:

• Activate your system as you would when leaving.
• Open a window or door that uses a contact sensor, or test other sensors. Close the door or window once you’re finished so it doesn’t trip the alarm when you reactivate the system.
• Allow the alarm to go off for 60 seconds to make sure a transmission is dispatched to the security company and an entry is created in the alarm system log.
• Continue testing equipment as you wish
• Check the alarm’s activity log to verify that everything’s working.

Don’t worry, monitoring agents can see that your system is being tested. Just make sure to turn test mode off when done. It’s smart to test monthly or anytime you change your home’s internet or phone service.

Inspect The Position And Condition Of Motion Detectors

Although an essential part of your alarm system, motion sensors are well known for false alarms. Prevent them with a few straightforward troubleshooting steps.

• Do a physical check. Are there things that could move within the detection path of the sensor, like drapery blown in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and grime can result in issues. Check to confirm the sensor is clean.
• Does the motion detector offer pet immunity you can turn on? Some sensors can be configured to disregard pets up to 100 pounds.
• When was the battery last replaced? Low batteries might impact performance or cause false alarms.
• Is the sensor aimed toward a heat source? Excess heat from sunlight or a fireplace can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Signals

One helpful benefit of the latest home security systems is that they’ll notify you when batteries are getting low. If your system is equipped with a control panel or smartphone app, you’ll often find notifications there. Depending on your system, you could detect an occasional beep when batteries are getting low. 

Motion sensors, contact sensors, smoke detectors, and other wireless components have batteries that need to be replaced every so often. It’s wise to keep batteries on hand and establish a replacement schedule. Some systems also include a backup battery for the central control panel. This battery keeps your system functioning if you have a power outage and should charge back up once power is restored. If it fails to recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Abilene 

As the top name in home security, ADT builds systems that supply unrivaled protection and functionality. Accessing test mode is simple through MyADT.com or the ADT+ app, and you’ll always be sent notifications when a sensor battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Abilene home and family. Call (325) 313-2016 or complete our form today!